This is a machine designed to assemble the safety medicine cap.
It can work two works at a once because it is equipped with both two tanks and seal feeder to feed the both plastic cap and seals.
Two plastic caps in the tanks are assembled and the seals are inserted into the caps.
This machine is equipped with an inspection camera to reduce zero contamination and apply to high-end products. So it will help to save labor cost and improve quality.
It is Easy to operate and maintenance, high rated of qualified products, low power consumption.
Features
1. This machine is used to combine aluminum-part with plastic-part for making flip-off seals(plastic-aluminum seals).
2. Working procedure:Firstly feed aluminum parts and plastic parts into the individual electromagnetic hopper,then both caps go through the chutes to the arrange table,Finally the caps are assembled by the heated assembling punches.
3. Adopt stainless steel SS201,22304,22316L,materials can be customized according to your requirements.
4. Working speed can be adjusted by controlling frequency controller
5. Comparing with the machine manufactured by other factories,our machine has the features of higher speed,higher qualified rate and less occupied area;
6. Easy to operate and maintenance,steady production with high efficiency;
7. Zero pollution,applicable for high-ends products;
8. Our machine can be equipped with auto material loader and conveyor for check,which will help to reduce labor intensity and increase qualified rate;
9. customized design and manufacturing is accepted
Technical specification
|
1
|
Machine name:
|
Automatic plastic bottle cap assembly machine for assembling caps from top supplier
|
|
2
|
Model:
|
UT
|
|
3
|
Lining heads:
|
1/2
|
|
4
|
Sealing dia:
|
Customized
|
|
5
|
Speed:
|
30-120ppm
|
|
6
|
Error Range:
|
≤±1%
|
|
7
|
Single machine noise:
|
≤50dB
|
|
8
|
Driven Type:
|
Electrical and Pneumatic
|
|
9
|
Compressed air pressure:
|
0.4~0.6Mpa
|
|
10
|
Speed control:
|
Frequency conversion
|
|
11
|
Power:
|
1.2KW,50-60HZ
220/380V/110V/415V (customized to different country)
|
|
12
|
Weight:
|
400Kg
|
|
13
|
Dimension:
|
2400*800*1800mm
|
|
1
|
Main electronic parts
|
SIEMENS /GERMAY
|
|
2
|
Electric protection switch
|
SIEMENS/GERMANY
|
|
3
|
Circuit breaker
|
SIEMENS/GERMANY
|
|
4
|
PLC
|
MITSUBISHI/JAPAN
|
|
5
|
Touch screen
|
WEINVEW/TAIWAN
|
|
6
|
Transducer
|
MITSUBISHI/JAPAN
|
|
7
|
Photo electricity switch
|
AUTONICS/KOREA
|
|
8
|
Pneumatic element
|
AIRTAC/TAIWAN
|
|
9
|
Pressure sensor
|
SMC/JAPAN
|
|
10
|
Motor
|
SIEMENS/GERMANY
|
